2 speakers, 2 network – Marantz SR6008 User Manual
Page 139
139
2 Speakers
Setting items
Description
Page
Audyssey® Setup
The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made
automatically.
Manual Setup
Perform when setting the speakers manually or when changing settings made in Audyssey® Setup.
Amp Assign
Select power amplifier usage method to match your speaker system.
Speaker Config.
Indicate speaker presence and select speaker size categories based on bass reproduction capability.
Distances
Set distance from listening position to speakers.
Levels
Set the volume of the test tone to be the same when it is output from each speaker.
Crossovers
Set the maximum frequency of the bass signal output from each channel to the subwoofer.
Bass
Set subwoofer and LFE signal range playback.
Front Speaker
Set the front speakers to use for every sound mode.
2 Network
Setting items
Description
Page
Information
Display network information.
IP Control
Enables network communication in standby power mode.
Friendly Name
The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name according to your
preferences.
Settings
Make settings for wired LAN.
Diagnostics
Used to check the network connection.
Maintenance Mode
Use when receiving maintenance from a Marantz service engineer or custom installer.