Marantz SR6008 - Manual (Page 208)

208
Appendix Settings Playback Connections Contents
Front panel Display Rear panel Index Remote
Tips
Resetting factory settings
Perform this procedure if the display is abnormal or if operations cannot be performed.
Note that when you perform this operation, various settings are reset to their default values and setup will need to be performed again.
X ZONE2 SOURCE
M-DAX
1 Turn off the power using X.
2 Press X while simultaneously pressing ZONE2 SOURCE
and M-DAX.
3 Once the display starts flashing at intervals of about 1
second, release the two buttons.
%
• If in step 3 the display does not flash at intervals of about 1 second, start over
from step 1.