Lan switches, Access layer ethernet switches, Access layer gigabit stack – D-Link DAS-3324G User Manual
Page 32: Features & benefits, Des-3528p, Des-3552, Des-3828dc, Des-3528gf, Des-3550, Des-3552p

D-Link Product Guide 2008
1
LAN SWITCHES
LAN SWITCHES
Features & Benefits
D-Link Product Guide 2008
1
* Stacking ports can also be used as 10/100/1000BASE-T Gigabit uplinks; total Gigabit uplinks remain as 4.
ACCESS LAyER
ethernet SwitcheS
DES-3528P
● 24 802.3af PoE 10/100BASE-TX Ports
● 2 10/100/1000BASE-T Gigabit Ports
● 2 Combo 10/100/1000BASE-T/SFP
Gigabit Uplinks
● 2 Stacking Ports *
● 12.8Gbps Switch Capacity
DES-3552
48-Port L2+ Ethernet Switch
24-Port L2+ PoE Ethernet Switch
● 48 10/100BASE-TX Ports
● 2 10/100/1000BASE-T Gigabit Ports
● 2 Combo 10/100/1000BASE-T/SFP
Gigabit Uplinks
● 2 Stacking Ports *
● 17.6Gbps Switch Capacity
DES-3828DC
24-Port L3 Ethernet Switch
● 24 10/100BASE-TX Ports
● 2 10/100/1000BASE-T Gigabit Ports
● 2 Combo 10/100/1000BASE-T/SFP
Gigabit Uplinks
● 12.8Gbps Switch Capacity
● Internal DC Power Supply
DES-3528GF
● 24 10/100BASE-TX Ports
● 4 Combo 10/100/1000BASE-T/SFP
Gigabit Uplinks
● SFP also Supports 100BASE-FX
Ethernet Fiber
● 2 Stacking Ports *
● 12.8Gbps Switch Capacity
24-Port L2+ Ethernet Switch
DES-3550
● 48 10/100BASE-TX Ports
● 2 Combo 10/100/1000BASE-T/SFP
Gigabit Uplinks
● 13.6Gbps Switch Capacity
48-Port L2 Ethernet Switch
DES-3552P
48-Port L2+ PoE Ethernet Switch
● 48 802.3af PoE 10/100BASE-TX Ports
● 2 10/100/1000BASE-T Gigabit Ports
● 2 Combo 10/100/1000BASE-T/SFP
Gigabit Uplinks
● 2 Stacking Ports *
● 17.6Gbps Switch Capacity
DES-3828
24-Port L3 Ethernet Switch
● 24 10/100BASE-TX Ports
● 2 10/100/1000BASE-T Gigabit Ports
● 2 Combo 10/100/1000BASE-T/SFP
Gigabit Uplinks
● 12.8Gbps Switch Capacity
DES-3828P
24-Port L3 PoE Ethernet Switch
● 24 802.3af PoE 10/100BASE-TX Ports
● 2 10/100/1000BASE-T Gigabit Ports
● 2 Combo 10/100/1000BASE-T/SFP
Gigabit Uplinks
● 12.8Gbps Switch Capacity
DES-3852
48-Port L3 Ethernet Switch
● 48 10/100BASE-TX Ports
● 2 10/100/1000BASE-T Gigabit Ports
● 2 Combo 10/100/1000BASE-T/SFP
Gigabit Uplinks
● 17.6Gbps Switch Capacity
ACCESS LAyER GIGABIT
Stack
● Fault Tolerant Ring Stacking
» Any broken link between two units in a stack
will not affect inter-switch traffic, as intra-
stack traffic is redirected toward the opposite
direction.
● High-Speed Physical Stacking
» Open slots for 10-Gigabit modules to use as
stacking ports. Each stacking port provides
20Gbps full-duplex operation.
» Shared 40Gbps full-duplex per stack, ample
bandwidth for intra-stack traffic.
● Scalable Expansion
» Up to 12 units, 576 Gigabit ports per stack.
» Switch units and optional 10-Gigabit modules
can be gradually added as network need grows.
● Trunking & Mirroring Across
Stack
» Allows trunking and mirroring to span multiple
switch units in the stack.
● 10-Gigabit Uplinks
» Open slots for optional 10-Gigabit modules for
uplinks to network servers and backbone.
● Full Layer 2 Functions
» 802.1Q VLAN, Double VLAN, LACP Port
Trunk, STP/RSTP/MSTP.
● Enhanced Layer 2+ Functions
» Layer 3 Routing: up to 128 Static Routes
(IPv4/v6).
» IPv6 tunneling.
● Multicast Support
» IGMP Snooping, MLD Snooping.
● Quality of Service (QoS)
» 802.1p Priority Queues (8 queues), L2/L3/L4
Multi-Layer CoS.
● Traffic Management
» Traffic Segmentation, Bandwidth Control
Down to 64Kbps, Broadcast Storm Control,
Jumbo Frame.
● Security
» IP-MAC-Port Binding Port Security, L2/L3/L4
ACL, RADIUS/TACACS+ Authentication, SSH,
SSL, 802.1X Port/MAC-based access control,
MAC-based/Web-based Access Control
(MAC/WAC), CPU Interface Filtering.
● Safeguard Engine
» Prevents ARP broadcast storm and protocol-
based attacks.
» ASIC is used to execute this prevention task to
offload switch’s CPU workload.
These Gigabit switches comprise the enhanced Layer 2+ access layer stack designed
for departmental Gigabit connection. Ideal for deployment at the network edge closer to
workstations for maximum scalability, these switches can be seamlessly integrated with
Layer 3 core switches through the optional 10-Gigabit uplinks to form part of a multi-layer
network structured with high-speed backbone and centralized servers.
Optional 10-Gigabit modules can be installed in the open slots to create a physical stack.
Up to 12 units can be stacked together to create 576 Gigabit ports. Users can install
one or two 10-Gigabit ports as stacking interfaces, depending on whether the linear or
fault-tolerant Ring stacking is implemented. Each stacking interface provides 20Gbps
full duplex transmission on the cost-effective coaxial cable. Modules with single 10-
Gigabit XFP can also be installed in any of the open slots for uplink to servers or a fiber
backbone.
Alternatively, an enhanced Layer 2+ access layer Gigabit switch can operate as a stand-
alone device. Embedded with Single IP Management capability, a stand-alone switch
can form part of a virtual stack, where intra-stack traffic flows through the usual network
wires, doing away with the costly stacking cables. Without stacking cables, cable distance
barriers and physical stacking limitations, a virtual stack can comprise units that are
located anywhere on the network to minimize the impact of any single point of failure.
DGS-3426
24-Port L2+ Gigabit Switch
DGS-3426
● 24 10/100/1000BASE-T Ports
● 4 Combo SFP Slots
● 2 Open Slots for 10-Gigabit Uplink
Modules
● 88Gbps Switch Capacity
24-Port L2+ Gigabit Switch
™
● 24 10/100/1000BASE-T Ports
● 4 Combo SFP Slots
● 2 Open Slots for 10-Gigabit Uplink
Modules
● 88Gbps Switch Capacity
● ZoneDefense
» Operates with D-Link NetDefend firewalls,
automatically quarantines infected
workstations and prevent them from flooding
the network with malicious traffic.
● IPv6 Ready Logo Phase 1
» Core functions such as IPv6 Specification,
Neighbor Discovery, Address Auto-
configuration and Internet Control Message
Protocol (ICMPv6) are included.
» Can interoperate with other IPv6
implementations.
● Administration
» Single IP Management, SNMP v1/v2c/
v3, Web Management, Port Mirroring,
CLI, Telnet, TFTP, Dual Image, BOOTP/
DHCP relay, DHCP Relay Option 82,
DHCP Auto Configuration, System log.
● Redundant Power Supply
Support
» Optional external power supply for
redundant power backup.
● D-View SNMP Management
» Management software module provided
for management under D-View.