Kleenmaid KED2000 - Manual (Page 21)

21
Operation
Using the dryer
1. Open the dryer door.
2. Check filter.
The filter should be cleaned after
and before every drying process.
Cleaning the filter reduces the
drying time and saves energy.
3. Rotate program selector to the
desired program.
Select the program which corĆ
responds to the laundry in the dryer
from the program selection table
(see Page 19).
The dryer light turns on inside the
drum.
i The estimated remaining time will
be indicated.
4. Select Additional Options on the
display. More detailed information
on the individual additional options
can be found on Page 17.
5. If required, select Options by
pressing the button.
The Options are explained on
Page 18.
i The estimated remaining time will
be updated.
6. Place laundry in the empty drum.
Put each piece of laundry into the
machine separately.
For best results the laundry to be
dried must be sorted according to
type of laundry and desired degree
of drying. For further information
see Page 15.
i Observe drying symbols of the
laundry manufacturer.
If drying woolen clothing and
shoes, see the information on
Page 18 and Page 22.
Ensure that there is only laundry
in the drum. Check that all items
are completely in the drum.
7. Close the door.
The Start/Pause indicator light
continues to flash.