Kleenmaid KED2000 - Manual (Page 17)

17
Additional options
i Before setting additional options,
choose a program with program
selector!
SymĆ
bol
Function Possible
setting
Sets the delay
start time of the
dryer (Start in ..
hours!)
0-12 h
(0.5 h steps)
Extra care (more
gentle than Low
Heat J)
On/Off
ChildĆproof lock
(only effective
while the
program
is running)
On/Off
Precision setting
of the desired
degree of
dryness
0, 1, 2, 3
Volume of the
end signal and
the Iron Dry
signal.
Off,
continuous,
maximum
see table on
Page 18
Coordinates the
remaining time
display to the
spin speed at
which the
laundry was
previously spun
in the washing
machine
400
600
800
1000
1200
Select the option to be changed with
the Menu button. Press the button to
jump to the next option on the display.
The active symbol starts flashing.
The current active option setting is
displayed on the right.
These settings can now be changed
with the Select button. Press the
button to jump to the next possible
setting.
i Pressing the Menu button again,
saves the previously settings.
If you don't press any button for
10 seconds the settings are saves
automatically.
Start Delay
i If you have chosen the additional
option Start Delay the symbol W
is displayed.
Extra Care
i If you have chosen the option
Extra Care, the Low Heat J
indicator light illuminates.
Pressing the Low Heat J button
cancels the additional option Extra
Care.
i If you have chosen the additional
option Extra care the symbol J
is displayed.
Safety guard
This additional option allows you to lock
your settings to prevent unintended use
of the dryer.
To start the dryer when the Safety
guard is active:
q Press and hold the Start/Pause
button for 4 seconds.
To unlock this additional option when
the dryer is running:
q Press and hold the Start/Pause
button for 4 seconds.
i When the dryer is running and the
Safety guard is active, the dryer
can be stopped by pressing the
Start/Pause button for 4 seconds.
i If you have chosen the additional
option Safety guard the symbol
G is displayed.
Degree of dryness
The residual moisture can be
individually reduced in 3 steps.
1, 2, 3: programs are lengthened
i If you have chosen the steps 1 to 3
of the additional option Degree
of dryness the symbol Z is
displayed.
0 is standard setting - symbol Z
is not displayed.