beautypg.com

Options, Status indicator – Kleenmaid KED2000 User Manual

Page 18

background image

18

Volume of the signal

Your dryer outputs different signals.

Signal

Type

Comment

Start

Short tone

Adjustable

volume

Iron Dry

Sequence

of medium

length tones

Adjustable

volume

End

Sequence

of short

tones

Adjustable

volume

MalĆ

operation

Sequence

of long

tones

Adjustable

volume

Warning

of malĆ

function

Sequence

of long

tones

Maximum

volume

You can change the volume of the

adjustable signals:
q Press and hold the Select button.

off

increasingly

maximum

Spin Speed

To optimize the remaining time display,

the spin speed at which the laundry

was previously spun in the washing

machine can be entered.

i

The B symbol is only displayed

for adjustment.

Options

Low Heat

J

Press the Low Heat Jbutton for

temperatureĆsensitive textiles. Observe

the care information or symbols on the

textiles. The temperature of the drying

process is reduced, the drying time is

extended.

i

For textiles which are especially

temperature sensitive (e.g. foundaĆ

tion garments and trousers) press

the Low Heat J button and set

the additional option Extra Care

(see Page 17), to further reduce

the temperature of the drying

process.

Reduced Ironing

f

To prevent the laundry from creasing,

the dryer drum rotates at specific

intervals following the drying program.

Standard setting for this function is

1 hour.
If the Reduced Ironing f button is

pressed, this function is extended to

3 hours.
The laundry remains loose and fluffy

until it is removed. The laundry should

be removed at the latest after this time

has elapsed.

Status indicator

The dryer uses an electronic system

for all programmes except the time

programmes and the special Woollens

programme. A moisture sensor

continuously checks the moisture in the

laundry. Drying ends automatically as

soon as the selected degree of dryness

has been reached.

The drum continues to rotate at

specific intervals for one hour to

prevent creasing.
The current state of the process and

the level reached during the

programme sequence is indicated via

indicator lights (Drying, Iron Dry,

Cupboard Dry, Anti Crease/end).

i

If the indicator light Anti Crease/
end illuminates when the proĆ

gramme selector is in Off position ć

pull the mains plug out and inform

the customer service.