Kemppi Pulse 350 - Manual (Page 18)

EN
AdmInIstrAtor mEnu (in main menu 2/7, user identification)
Change PIN Code Administrator pin code
change.
Factory PIN code: 0000.
Ask PIN PIN code inquiry selection:
OFF / StartUp / Menu
Factory Setting: OFF OFF: No PIN code inquiry.
StartUp: Setup panel (K 60) always
asks for the PIN code when the
machine is turned on. KF 62 is not
affected and always works without
PIN.
Menu: Setup panel (K 60) asks
every time for PIN code when MENU
button is pressed and when the
display is in channel info mode i.e.
in start-up view. PIN code inquiry is
made only once when entering the
menu. After that the menu button
can be pressed any time without PIN
inquiry.
Button FunCtIons
ON / OFF Button Short Press: Panel returns to default start-up display view (Channel info display).
Long Press: When setup panel (K 60) is ON => Setup panel and all KF 62 panels are turned OFF.
When setup panel is OFF => Setup panel and all KF 62 panels are turned ON.
Pressed while machine is turning ON: Restore to factory shortcut. Panel will ask confirmation to
restore factory setting.
If Setup panel is OFF and some other KF 62 panel is turned ON the Setup Panel turns also ON and will
be linked automatically to this KF panel (WF# function).
F1 Button F1 button gives further information of selected memory channel.
Pressed while machine is turned ON: Restore language selection to English.
F3 Button (WF#) F3 button can be used to select Wire Feeder.
Panel allows selecting only those WF numbers that are found connected on the sys-tem.
Channel +/- Memory channel selection.
Up/Down Button Moving Up/Down in menu.
Right/Left
selection buttons
(Soft Keys)
Button function depends on where in menu you are.
16
Kemp
a
rc
pulse 350, 450 / © Kemppi O
y / 1044