Kawai MP10 - Manual (Page 68)

68
US
B
M
e
n
u
USB Menu functions
2
Save
These functions allow data stored in the instrument’s internal memory to be saved to a USB memory device.
1. Save One Sound
This function saves the currently selected sound’s parameters
to a USB memory device.
* If the MIDI section is currently selected, the current PIANO section sound
will be saved automatically.
After selecting this function, a confirmation screen will be
shown in the LCD display. Press the F4 function button (NEXT)
to continue.
Enter a name for the saved SOUND file using control knobs A
and B, then press the F4 function button (EXEC).
Finally, press the F2 or F3 function buttons to confirm or cancel
the save operation.
2. Save One Setup
This function saves a SETUP memory to a USB memory device.
After selecting this function, a confirmation screen will be
shown in the LCD display. Press the BANK and SETUP memory
buttons to specify the destination SETUP memory, then press
the F4 function button (NEXT) to continue.
Enter a name for the saved SETUP file using control knobs A
and B, then press the F4 function button (EXEC).
Finally, press the F2 or F3 function buttons to confirm or cancel
the save operation.
3. Save SMF
This function saves an internal recorder song to a USB memory
device in SMF format.
After selecting this function, the Save SMF screen will be
shown in the LCD display. Select the song memory to be saved
using control knob C, and enter a name for the saved SMF file
using control knobs A and B, then press the F4 function button
(EXEC).
Finally, press the F2 or F3 function buttons to confirm or cancel
the save operation.
* For more information about the song recorder, please refer to page 52.