Kawai MP10 User Manual
Page 27
section
27
Basic
O
per
a
tion
EQ Section
The EQ section consists of a 3-band graphic equaliser that can be used to shape the overall tone of the MP10’s
internal sound sections. In addition, the mid-range frequency can also be adjusted as a parametric equaliser. The
equaliser setting is common to all sounds sections.
Turning EQ ON/OFF
Press the EQ ON/OFF button to turn the equaliser ON/OFF.
The LED indicator for the EQ ON/OFF button will turn ON or OFF
to indicate the current status of the eqauliser.
Adjusting EQ parameters
Turn the LO, MID, and HI knobs to adjust each equaliser band.
Turn the FREQ knob to adjust the frequency of the mid-range EQ.
The equaliser screen will be shown in the LCD display, with knob
adjustments influencing the LO, MID, and HI levels, and mid-
range frequency.
* The LO, MID, and HI levels can be adjusted within the range of –9 - +9 dB.
* The mid-range FREQ can be adjusted within the range of 355 - 2500 Hz.
The display will return to the Play Mode screen after a few
seconds of inactivity.
To check the equaliser screen without adjusting the EQ knobs,
press and hold the EQ ON/OFF button.
* The EQ section levels can be offset using the EQ Offset setting in the Offset
page of the SYSTEM menu (page 74), or by pressing and holding the EQ
button then turning the LO/MID/HI knobs.
Equaliser OFF
Equaliser ON