Kawai MP10 - Manual (Page 62)

62
Re
corde
r
3
Overdubbing an audio file
The overdub function adds supplementary recording(s) to an existing audio file, facilitating simple multi-track
recordings to be produced directly on the instrument.
Each overdub is recorded to a temporary file (i.e. the original audio file is not modified), allowing an unlimited
number of overdubs that to be made before eventually saving the final recording.
1. Entering audio playback mode
Connect a USB memory device.
Press the RECORDER button.
The LED indicator for the RECORDER button will turn ON and
the Audio recorder screen will be shown in the LCD display.
Press the F3 function button (LOAD).
A listing of the MP3 files stored in the root folder of the USB
device will be shown in the LCD display.
* To list the WAV files stored on the USB device, press the F3 function button.
2. Selecting the audio file to overdub
Turn control knob A, or press the CURSOR c or CURSOR d
buttons to select the desired MP3 file.
Press the F4 function button (EXEC).
The Audio Player screen will be shown in the LCD display.
* If available, the audio file’s metadata (ID3 tags etc.). will also be shown.
3. Selecting the overdub function and file format
Press the F2 function button (OVERDUB).
The overdub file format selection screen will be shown in the
LCD display.
Turn control knob B to select the desired overdub file format.
* MP3 audio files require less storage space than WAV audio files.
* A 1 GB USB memory device can store over 12 hours of MP3 audio data.
Audio Record/Playback
(USB Memory)