Kawai MP10 - Manual (Page 53)

53
Re
corde
r
2
Playing back a song
This function is used to playback recorder songs stored in internal memory. To playback a song immediately after
recording, start this process from step 2.
1. Entering song playback mode
Press the RECORDER button.
The LED indicator for the RECORDER button will turn ON and
the MIDI recorder screen will be shown in the LCD display.
If a USB memory device is connected, press the F1 function button
(MIDI) to select the MIDI recorder function.
Turn control knob C to select the song memory to playback.
2. Starting song playback
Press the F4 function button (PLAY) or f/„ button.
The LED indicator for the f/„ button will turn ON, and the
selected song will start to play.
Press __ or `` buttons to fast-forward or rewind the song.
The A and B control knobs can also be used to adjust the volume
and tempo of the song playback.
Press the f/„ button to stop playback, then press the „e button
to reset the playing position of the song to the beginning.
* To activate the ‘Chain Play’ mode, press and hold the f/„ button.
All recorded songs will be played in sequence.
„ A-B Repeat function
The A-B Repeat function allows one section of a song to be repeated
continuously. During song playback:
Press the A  €B button once to set the start point.
The LED indicator for the A  €B button will start to flash.
Press the A  €B button again to set the end point.
The LED indicator for the A  €B button will turn ON and the
specified section will repeat continuously.
To cancel the A-B repeat function, press the A  €B button once
again.
The LED indicator for the A  €B button will turn OFF and normal
playing will resume.
Fast-Forward Rewind