Kawai MP10 - Manual (Page 55)

55
Re
corde
r
5
Loading an SMF file into memory
This function can be used to load SMF files into an empty recorder song memory.
„ Preparing the USB memory device
First, prepare a selection of SMF MIDI files, copying the data to
a USB memory device.
* USB devices should be formatted to use the ‘FAT’ or ‘FAT32’ filesystems.
1. Selecting the Load SMF function
After selecting the MIDI recorder:
Turn control knob C to select an empty song memory, or follow
the instructions on page 57 to erase an existing song memory.
Connect a USB memory device.
* USB devices should be formatted to use the ‘FAT’ or ‘FAT32’ filesystems.
The USB device will be scanned, and the LOAD function will
appear at the bottom of the LCD display.
Press the F3 function button (LOAD).
A listing of the SMF files stored in the root folder of the USB
device will be shown in the LCD display.
„ USB device file/folder listing screen
The MP10’s file/folder listing screen lists the files and folders
stored in the root of the USB device.
The selection cursor can be moved by turning control knob A,
or pressing the CURSOR c or CURSOR d buttons.
The < > symbols are used to indicate a folder, while the topmost
[dir up] entry is used to return to the parent/previous folder.
2. Selecting the SMF file to load
Turn control knob A, or press the CURSOR c or CURSOR d
buttons to select the desired MIDI file.
Press the F4 function button (NEXT).
The Load SMF screen will be shown in the LCD display.
Added USB function
Select song memory