Kanguru Defender Elite200 - Manual (Page 21)

21
2.3.1 Resetting from the Login Screen
In the event you have forgotten your password, you can use the Reset to Factory Default function to reset
your password. This function will restore the device to the factory settings, erasing all saved passwords
and data residing on the device’s secure partition.
Caution! Using the Reset to Factory Default function will format and wipe all data off the device! All
data on the device will be lost!
To reset your Defender Elite200 to the factory default:
1. Start KDMElite200.
2. When the login screen appears, click on the Reset button.
3. When you are prompted to confirm the reset, click on the Yes button.
4. When your password and data stored on the secure partition have been erased, the following
message will appear. Click on the OK button to complete the reset.
The next time you run KDMElite200, you will have to complete the Setup Wizard again before you are
able to access the secure partition. Please see section 2.2 The Setup Wizard on page 14 for instructions
on completing the Setup Wizard.
Resetting from the Login Screen