Kanguru Defender Elite200 - Manual (Page 13)

13
2.1.4 Running KDMElite200 on Red Hat Enterprise Linux 5
Note: You must have Super User or Root privileges in order to run KDMElite200 on Red Hat Enterprise
Linux 5.
To run KDMElite200 from the Red Hat Enterprise Linux 5 operating system, connect your Defender
Elite200 to your computer through a USB port. A CD icon named ‘KDMElite200’ will appear on the
desktop. If the KDMElite200 window doesn’t open automatically, double click on the KDMElite200
icon to open it.
From the window that opens, copy the kdme200_exec.sh shell script file to a location on your
computer’s local hard drive.
Once the kdme200_exec.sh shell script has been copied to a local hard drive, you can execute
KDMElite200 through the Terminal:
1. Open the Terminal window by clicking on Applications → Accessories → Terminal. The Terminal
location may be different depending on which version of Red Hat you are running.
2. From the Terminal, navigate to the directory where you copied the kdme200_exec.sh shell script
file to.
3. Type, “chmod 007 kdme200_exec.sh” to allow full execute permission.
4. Type, “./kdme200_exec.sh” to execute the shell script.
If it is your first time running KDMElite200 you will need to complete the setup wizard in order to set
your security password (see section 2.2 The Setup Wizard on page 14). If you have already setup your
security password, you will be prompted to login (see section 2.3 Unlocking the Security Partition on
page 20).
Running KDMElite200 on Red Hat Enterprise Linux 5