Kanguru Defender Elite200 - Manual (Page 19)

19
2.2.6 Resetting the Device through the Setup Wizard
If you experience any problems during the Setup Wizard, you may have to perform a device reset before
you can complete the setup process.
To perform a device reset while in the Setup Wizard:
1. From anywhere in the Setup Wizard, click on the Prev button until you return to the Welcome
Screen.
2. On the Welcome Screen you will see a Reset button in the lower-left side of the application window.
Click on the Reset button.
3. A dialog box appears asking you to confirm the reset. Click on Yes to reset your device to the
factory default settings.
After the device has been reset to the factory default setting you will be required to restart the Setup
Wizard.
Resetting from the Setup Wizard