JLCooper eBOX - Manual (Page 44)

44
In Programming mode, only one button (the one being
n be active at once. In Live mode, any button can
be active. The exception is the Serial Preset Transport Controls.
Within each preset bank, each transport control is mutually
exclusive.
hen the eBox Control Center is the front application in Live
s
e background, or not
nning at all, the eBox driver automatically switches keysets
hen the eBox Control Center is not the front application, you can
the eBox Control Center is visible in the background, and in
programmed) ca
W
mode, you determine which keyset is active using the Keyset
menu. If the eBox Control Center is in th
ru
based on the front application. If there is no keyset for the
frontmost application, then the driver uses the Global keyset.
W
use the keyboard triggers you defined in Programming Mode to
initiate the actions you assigned to the various buttons.
If
Live Mode, then its indicators will still display the states of the
GPI Input and Output Pins and the Serial Port Inputs.