Ivoclar Vivadent IPS e.max CAD Chairside - Manual (Page 31)

31
Hold the restoration by the IPS e.max CAD Crystallization Pin. Spray the IPS e.max CAD Crystall./Glaze Spray directly on the unfired
IPS e.max CAD Crystall./Shades and Stains. Spray the restoration from all sides
while simultaneously rotating it.
Shake the spray can again between individual bursts. Spray an even layer onto the restoration.
Allow the IPS e.max CAD Crystall./Glaze Spray to dry briefly until a whitish layer has formed.
If required, spray the restoration again to achieve an even Glaze Spray layer on the IPS e.max
CAD restoration. Place the restoration in the center of the IPS e.max CAD Crystallization Tray
and fire using the stipulated parameters.
– If a maximum of 2 restorations to which the Glaze Spray has been applied are crystallized at the same time,
the Speed Crystallization/Glaze Spray can be used.
– If more than 2 restorations are crystallized, crystallization is carried out with the firing program
Crystallization/Glaze. Staining Technique