Preparing for crystallization, Characterization / glaze / adjustments – Ivoclar Vivadent IPS e.max CAD Chairside User Manual
Page 15

15
15
Preparing for Crystallization
IPS Object Fix Putty and IPS Object Fix Flow are auxiliary firing pastes with
different viscosities to support IPS e.max CAD restorations during the crystallization
process. The pastes are used to stabilize and secure the corresponding restoration on
the IPS e.max CAD Crystallization Pins.
IPS Object Fix Putty and IPS Object Fix Flow are easy to apply
and remove after the firing procedure.
Characterization / Glaze / Adjustments
IPS e.max CAD restorations are characterized with
IPS e.max CAD Crystall./Shades and Stains. There are
7 IPS e.max CAD Crystall./Stains and 5 IPS e.max CAD
Crystall./Shades available. To imitate the incisal area,
2 IPS e.max CAD Crystall./Shade Incisal materials,
which enhance the optical in-depth effect and the translucency in the incisal
third, can be used.
IPS e.max CAD Crystall./Glaze Liquid is used to dilute the IPS e.max CAD Crystall./
Shades, Stains and Glaze pastes.
To glaze the IPS e.max CAD restoration, you may choose between the
IPS e.max CAD Crystall./Glaze Paste and the IPS e.max CAD Crystall./
Glaze Spray.
For shape adjustments (e.g. proximal or occlusal contact points), IPS e.max CAD
Crystall./Add-On is available . It is mixed with the IPS e.max CAD Crystall./
Add-On Liquid and can be directly applied with the crystallization firing or any
subsequent corrective firing.
Overview of the Treatment Procedure