Ivoclar Vivadent IPS e.max CAD Chairside - Manual (Page 28)

28
Depending on the individual patient situation, the characterizations may be applied as follows (examples: shade A2):
Example of an excessively thick layer of IPS e.max CAD Crystall./Shades and Stains
Slight characterizations on the buccal surfaces using IPS e.max CAD Crystall./Shades and
Stains Occlusal characterizations using IPS e.max CAD Crystall./Shades and Stains
Too thick a layer of IPS e.max CAD Crystall./Shades and Stains Too thick a layer of IPS e.max CAD Crystall./Shades and Stains
•••• Cusp inclinations: Shade Incisal I1
•••• Fissures: Stains mahogany
•••• Cusps, marginal ridges: Stains white/cream
•••• Reinforcing the chroma: Stains sunset/copper
Characterization Guide
With the IPS e.max CAD Crystall./Shades and IPS e.max CAD Crystall./Stains, you have the possibility to apply characteriza-
tions already in the “blue” state of the restoration prior to combination firing. The following Shades and Stains are
available for characterization:
Shade
Incisal 1
Shade
Incisal 2
Shade 0 Shade 1 Shade 2 Shade 3 Shade 4
white cream sunset copper olive khaki mahogany
IPS e.max CAD Crystall./Shades
IPS e.max CAD Crystall./Stains