Ivoclar Vivadent IPS e.max CAD Chairside - Manual (Page 18)

18
e.max
®
CAD
Processing Options
IPS
Preparation
CAD/CAM Process
Clinical try-in
Recommended
option
Veneer, inlay, onlay
using glaze paste
See page 21
– Veneer, inlay, onlay on OptraStick
– Aplication of the glaze paste and stains using
a brush
– Combination firing (Crystallization/Glaze);
duration: approx. 25 minutes
Veneer, inlay, onlay
using glaze spray
See page 30
– Veneer, inlay, onlay must be secured with
IPS Object Fix Putty on a pin. Adapt Object
Fix Putty exactly to the margins (see page 27).
– Application of stains using a brush
– Application of the Glaze Spray
– Speed-crystallization/Glaze Spray (at most
2 restorations at a time),
duration: approx. 20 minutes
Recommended
option
Partial crown, crown
using glaze spray
See page 24
– Attach the partial crown, crown to the pin
using IPS Object Fix Putty or Flow
– Apply the stains using a brush
– Application of the Glaze Spray
– Speed-crystallization/Glaze Spray
(at most 2 restorations at a time),
duration: approx. 20 minutes
Partial crown, crown
using glaze paste
See page 34
– Attach the partial crown, crown to the pin
using IPS Object Fix Putty or Flow
– Aplication of the glaze paste and stains using
a brush
– Combination firing (Crystallization/Glaze);
duration: approx. 25 minutes
After clinical try-in, the restoration is finished, depending on the type of restoration. There are various options available for
finishing.