Ivoclar Vivadent Bluephase 20i - Manual (Page 6)

10
Start-up
Delivery form
Check the delivery for completeness and any possible trans-
portation damage (see Delivery form). If components are
missing or damaged, immediately contact your dealer or
your Service Center.
Charging base
Before you switch on the device, make sure that the volt-
age mentioned on the rating plate complies with your local
power supply. The rating plate is attached to the underside
of the charging station.
Place the charging base on a suitable, flat table top.
Remove the protective foil from the connection plug of the
power pack. Slide the connection plug of the power pack
into the socket on the underside of the charging base. Tilt
it slightly and apply light pressure until you hear and feel it
snap into place.
Connect the power cord with the power supply and the
power pack.
The Power ON indicator on the left side of the housing
lights up in blue (see Indicators on the charging base).