Ivoclar Vivadent Telio CS - Manual (Page 7)

7
Note
Do not use in case of known hypersensitivity to
methyl methacrylate. Do not use products contain-
ing methyl methacrylate intraorally.
Storage instructions
– Protect the materials from direct sunlight.
– Observe the storage instructions and the expiry
date on the secondary packaging.
– Do not use the products after the indicated
expiry date.
– Keep out of the reach of children!
–
Telio CS C&B
Use only at room temperature (cooled material
is more viscous and takes longer to cure). Leave
the used mixing tip on the syringe as a cap
until the next application.
– Telio CS Desensitizer
Close bottle immediately after use.
– Telio Stains and Telio Add-On Flow
Syringes should be closed immediately after
use. Exposure to light causes premature poly-
merization.
– Telio CS Link
Storage at 2-8°C / 36-46°F. Use only at room
temperature (cooled material is more viscous
and takes longer to cure). After use, leave the
mixing tip on the syringe as a closure.
P
ro
d
u
ct
in
fo
rm
a
ti
o
n
Warning
– Prevent contact of uncured Telio CS C&B and
Telio CS Link with the skin and eyes.
Minimize contact of uncured Telio CS C&B
with the mucous membrane.
– Uncured Telio CS C&B and Telio CS Link may
cause slight irritation and in rare cases may
lead to a sensitization to methacrylates after
repeated skin contact.
– Commercially available medical gloves do
not provide protection against the sensitizing
effect of methacrylates.
– Telio CS Desensitizer contains glutaraldehyde
and is harmful if inhaled or swallowed.
Prevent contact with skin, mucous
membranes and eyes. If the material should
accidentally come in contact with the eyes,
immediately rinse with copious amounts of
water and consult a physician. Repeated
skin contact and inhalation may cause
sensitization.
– Telio Activator contains methyl methacrylate
(MMA). Skin contact may cause
sensitization.
– Telio Activator is only for extra-oral
application.
– MMA is highly flammable and irritating
(flash point: +10 °C/50 °F).
– Irritating to eyes, respiratory organs and skin.
– Do not inhale vapours.
– Keep away from sources of ignition. Do not
smoke.
– Prevent contamination of the sewage
system.
– Take measures against electrostatic charge.
– Do not inhale resin dust during finishing of
Telio CAD – use exhaust air discharge and
mouth protection.