Preparing the double cartridge – Ivoclar Vivadent Telio CS User Manual
Page 13

Te
li
o
C
S
C
&
B
–
F
a
b
ri
ca
ti
n
g
te
m
p
o
ra
ry
cr
o
w
n
s
a
n
d
b
ri
d
g
e
s
Preparing the double cartridge
13
1. Press the black release lever located below the
plunger on the back of the dispenser and pull
the plunger as far back as possible.
2. Lift the cartridge lock and insert the cartridge.
Lower the cartridge lock. Push the plunger
forward until it touches the cartridge.
3. Remove the sealing cap or used mixing tip by
turning it in a 1/4 turn counter clockwise and
discard it; do not reuse it.
4. Insert a new mixing tip. Push the tip down until
the notch on the mixing tip touches the notch
on the cartridge.
While gripping the coloured base, and not the
mixing tip, turn the mixing tip base 1/4 turn
clockwise.
This manual is related to the following products: