Ivoclar Vivadent Telio CS - Manual (Page 20)

20
Apply Telio Add-On Flow and sculpt with a spatula (e.g. OptraSculpt) …
... to the desired shape.
Polishing with silicon carbide rubber polishers (e.g. OptraPol)
Light-cure
Filling of air bubbles or chippings
A light-curing Ivoclar Vivadent composite (e.g. Telio Add-On Flow/Tetric EvoFlow) is used to directly fill or
cover the areas that need to be modified.
The Telio Add-On Flow material is applied with a spatula (e.g. OptraSculpt) and shaped. Telio Add-On
Flow is cured with a high-power curing light (>1000 mW/cm
2 ; e.g. bluephase) in 15 s per segment or with
a standard curing light (>500 mW/cm 2 ) in 30 s per segment.
Finally, polish using silicon carbide rubber polishers (e.g. Astropol).