Ivoclar Vivadent IPS e.max ZirPress - Manual (Page 73)

73
Press Parameters for IPS e.max ZirPress
Take the press furnace and the selected investment ring size into account
B t ➚ T H V 1 V 2 A
°C/°F °C/°F/min °C/°F min. °C/°F °C/°F
700/1292 60/108 900/1652 15 500/932 900/1652 Programm 11–20
700/1292 60/108 910/1670 15 500/932 910/1670 Programm 11–20
700/1292 60/108 940/1724 40 500/932 940/1724 Programm 31–51
700/1292 60/108 900/1652 15 500/932 900/1652 300
700/1292 60/108 910/1670 15 500/932 910/1670 300
700/1292 60/108 930/1706 40 500/932 930/1706 250 µm/min
Press Furnace IPS Investment
Ring System
100 g
200 g
300 g
100 g
200 g
300 g
EP 500
EP 600/
EP600 Combi
The parameters indicated represent standard values and apply to the Ivoclar Vivadent furnaces EP 3000 and EP 5000.
The temperatures indicated also apply to older model furnaces. However, the temperatures may deviate by approx.
± 10 °C/18 °F depending on the age of the heating muffle.
If a non-Ivoclar Vivadent furnace is used, temperature corrections may be necessary.
Regional differences in the power supply or the operation of several electronic devices by means of the same circuit
may also render adjustments of the temperatures necessary.
Press and Firing Parameters
Select the press program in accordance with the investment ring size used. Programat EP 3000
Select the press program in accordance with the investment ring size used.
Note:
Starting with software version V3.3, the IPF (Intelligent Press Function) is
available for IPS e.max ZirPress. With this function, the pressing times in the
IPS Investment Ring System 300 g can be substantially shortened.
Programat EP 5000