Ivoclar Vivadent IPS e.max ZirPress - Manual (Page 27)

27
C
li
n
ic
a
l
S
te
p
s,
F
ra
m
e
w
o
rk
P
re
p
a
ra
ti
o
n
,
C
o
n
to
u
ri
n
g
,
P
re
ss
in
g
P
ro
ce
d
u
re
Provide a cold IPS Alox Plunger and cold IPS e.max
ZirPress ingots in the desired shade.
Place the cold IPS e.max ZirPress ingot into the hot
investment ring, with shade imprint facing upward.
Then, place the powder-coated side of the IPS Alox Plunger
into the
hot investment ring.
Place the hot and completed investment ring in the center
of the hot press furnace using the IPS Investment Ring
Tongs
Press START to start the selected program. Once the press program is completed, place the hot invest-
ment ring on the cooling grid using the investment ring
tongs and allow it to cool to room temperature.
Provide a cold IPS Alox-Plunger and cold IPS e.max
ZirPress ingots in the desired shade.
Place the cold IPS e.max ZirPress ingot into the hot
investment ring, with shade imprint facing upward.
Place the cold IPS One-Way Plunger 300 g ing the hot
investment ring.
Place the hot and completed investment ring in the center
of the hot press furnace using the IPS Investment Ring
Tongs
Press START to start the selected program. Once the press program is completed, place the hot invest-
ment ring on the cooling grid using the investment ring
tongs and allow it to cool to room temperature.
Procedure for pressing when using the…
IPS Alox Plunger for the IPS Investment Ring System 100, 200 g
IPS One-Way Plunger 300 g for the IPS Investment Ring System 300 g