Ivoclar Vivadent IPS e.max ZirPress - Manual (Page 11)

11
C
li
n
ic
a
l
S
te
p
s,
F
ra
m
e
w
o
rk
P
re
p
a
ra
ti
o
n
,
C
o
n
to
u
ri
n
g
,
P
re
ss
in
g
P
ro
ce
d
u
re
1.0
1.5
1.0
1.5
2.0
1.0
1.5
2.0
1.0 1.0
1.5
2.0
1.5
6°
– Evenly reduce the anatomical shape and observe the stipulated minimum thickness. Prepare a circular shoulder
with rounded inner edges or a chamfer of a width of at least 1.0 mm.
– Reduce the incisal crown third – incisal and/or occlusal – by approx. 2.0 mm.
– For anterior crowns, the reduction in the labial and/or palatal/lingual area is at least 1.5 mm. The incisal edge of
the preparation should be at least 1.0 mm (milling tool geometry) in order to permit optimum milling of the
incisal area during CAD/CAM processing.
– For posterior crowns, the reduction in the buccal and/or palatal/lingual area is at least 1.5 mm.
– For conventional and/or self-adhesive cementation, the preparation must demonstrate retentive surfaces.
Multi-Unit Bridges