Option b – Ivoclar Vivadent IPS e.max CAD Labside User Manual
Page 25
25
S
ta
in
in
g
Te
ch
n
iq
u
e
Extrude IPS e.max CAD Crystall./Shades and Stains from the syringe and mix thoroughly. If
required, thin with IPS e.max CAD Crystall./Glaze Liquid
Apply mixed Shades and Stains directly on the blue restoration
Option B:
Crystallization and Stain/Glaze firing in one step with IPS e.max CAD Crystall./Glaze Spray
IPS e.max CAD Crystall./Glaze Spray is used instead of IPS e.max CAD Crystall./Glaze Paste. The spray
should only be used if IPS Object Fix auxiliary firing paste is adapted up to the margins.
Preparation for Crystallization and Glaze firing
If IPS e.max CAD Crystall./Glaze Spray is used, all the restorations, irrespective of their geometry, have to
be placed on the IPS e.max CAD Crystallization Pin with the help of IPS Object Fix Putty or Flow.
with
IPS e.max CAD Crystallization Pin
without
IPS e.max CAD Crystallization Pin
Veneers, inlays, onlays,
partial crowns, anterior crowns,
posterior crowns
Exactly adapt IPS Object Fix Putty or Flow to the
restoration margin so that the Glaze Spray is
prevented from reaching the inner aspects.
Procedure:
– Secure the restoration on a suitable IPS e.max CAD Crystallization Pin as described in Option A.
– Make sure that the auxiliary firing paste (IPS Object Fix Putty or Flow) is flush with the restoration
margin. If veneers, inlays, and onlays are glazed with Glaze Spray, they also have to be enclosed in
firing paste exactly to the restoration margin.
Combination firing (Crystallization and Stain/Glaze firing in one step)
– Before starting the characterization and glazing procedure, make sure the outside of the restoration is
free of auxiliary firing paste.
– If characterizations are desired, the restoration can be individualized using IPS e.max CAD
Crystall./Shades and IPS e.max CAD Crystall./Stains before Crystallization firing.
– Extrude ready-to-use Shades and Stains from the syringe and mix thoroughly.
– The Shades and Stains may be slightly thinned using IPS e.max CAD Crystall./Glaze Liquid. However,
the consistency should still remain pasty.
– Apply mixed Shades and Stains directly on the blue restoration using a brush.