D-Link DI-304M - Manual (Page 94)

DI-304/DI-304M ISDN Remote Router
FAQs
The following section covers answers for some frequently asked questions.
1. What is the default administrator password to login to the router?
A: By default, you do not need a password to login to the router. However, for
security reasons, you should assign a password to protect your router against
misusage and hacker attack.
2. What is the default IP address of the router?
A: The default IP address is 192.168.0.1 with subnet mask 255.255.255.0.
3. Why does the router dial out very often?
A: Examine the packets that trigger the router to dial out. Login to the Web
Configurator and click Diagnostic Tools
→ Triggered Dial-out Packet Header.
You will see the triggered packet contents. Report the results to technical support by
e-mail or telephone.
4. Why can't I connect to the Web Configurator?
A: Remove the proxy server settings in your Web browser.
5. Why can I ping to outside hosts but can not access Internet Websites?
A: Check if the Primary and the Secondary DNS servers have been correctly setup
on your PC. You should have received the DNS server settings from your ISP. If
your PC is running a DHCP client, remove any DNS IP address settings since the
router will assign the DNS settings to the DHCP-client-enabled PC.
6. How many IP addresses can the DHCP server of the router assign to local
PCs?
A: The built-in DHCP server can support 253 IP addresses for local network usage.
86