D-Link DI-304M User Manual

Page 55

DI-304/DI-304M ISDN Remote Router

♦ Enable CLID Authentication – Limit the dial-in router to be called from

a specific ISDN number.

♦ Peer ISDN Number – If CLID Authentication is enabled, enter the

remote router's ISDN number in this field

♦ Link Type – Refer to Dial-Out Settings.
♦ PPP Authentication – Refer to Dial-Out Settings.
♦ VJ Compression – Refer to Dial-Out Settings.
♦ Callback Function (CBCP) – Checking here allows this router to accept

requests from a remote router for call back.

◊ Enable Callback Function - Checking here to enable this function.
The router owner will be charged the connection fee by the telecom.
◊ Use the Following Number to Callback:

- Callback Number: Check here and enter a callback number
for the router to call.
- Callback Budget: Specify a time budget for the callback
function. By default the budget is set to zero, which means no
call back attempt will work.

TCP/IP Network Settings
The following settings are required for proper LAN-to-LAN operation.

♦ My WAN IP – In most cases you may accept the default value in this

field. The router will then get a WAN IP address from the remote router
during the IPCP negotiation phase. If the WAN IP address is fixed by
remote, specify the fixed IP address here.

♦ Remote Gateway IP – Specify the IP address of the remote router.
♦ Remote Network IP – Specify the network identification of the remote

network. For example, 192.168.1.0 is a network identification of a class-C
subnet with netmask 255.255.255.0 (/24).

♦ Remote Network Mask – Specify the netmask of the remote network.
♦ RIP Direction – The option specify the direction of RIP (Routing

Information Protocol) packets through the ISDN WAN connection.

♦ RIP Version – Select the RIP protocol version. Specify Ver. 2 for

greatest compatibility.

♦ For NAT operation, treat remote sub-net as – Toggle between Private

IP and Public IP.

Recall the LAN-to-LAN example described earlier in this chapter. The LAN-to-
LAN Dialer Profile could be configured as below.

Head Office:

This manual is related to the following products:

DI-304