D-Link DI-304M - Manual (Page 23)

DI-304/DI-304M ISDN Remote Router
Configuring the TCP/IP Protocol
1. On the Network dialog box Configuration card, select TCP/IP and then click
Properties. The TCP/IP Properties dialog box will open.
2. On the IP Address tab, click Obtain an IP address automatically. As the
DHCP (Dynamic Host Configuration Protocol) server built into the router is enabled
by default, your computer will get an IP address, subnet mask, and other related IP
network settings from the router.
3. On the DNS Configuration tab, click Disable DNS.
15