D-Link DI-304M - Manual (Page 38)

DI-304/DI-304M ISDN Remote Router
ISP Access Setup
♦ ISP Name – Enter your ISP name.
♦ Dial Number – Enter the ISDN access number provided by your ISP.
♦ Username – Enter the username provided by your ISP.
♦ Password – Enter the password provided by your ISP.
♦ Require ISP Callback (CBCP) – If your ISP supports the callback
function, check "Require ISP Callback (CBCP)" to enable the Callback
Control Protocol during PPP negotiations.
♦ Scheduler (1-15) – Enter up to 4 index numbers for calls that have been
previously configured on the Call Schedule Setup windows (under
Advanced Setup).
PPP/MP Setup
♦ Link Type – There are four link types:
◊ Link Disable - Disable the ISDN dial-out function.
◊ Dialup 64Kbps - Use one ISDN B channel for Internet access.
◊ Dialup 128Kbps - Use both ISDN B channels for Internet access.
◊ Dialup BOD -BOD stands for bandwidth-on-demand. The router
will use only one B channel under low traffic situations. Once the
single B channel bandwidth is filled, the other B channel will be
dialed automatically. For more detailed BOD parameter settings,
refer to the Advanced Setup group
→ Call Control and PPP/MP
Setup.
◊ None not included.
♦ PPP Authentication – There are two types of authentication:
◊ PAP Only - Set the PPP session to use the PAP protocol to
negotiate the username and password with the ISP.
30