Hypertherm HTA Rev 6.00 Operators Manual - Manual (Page 94)

80 Operator’s Manual
Upload to Host
The following screen is used to upload a part to a host computer. Once all the parameters below are
set, press ENTER on the keyboard to start the upload.
Upload to
The Upload to list selects which directory on the host computer that you want to upload to. To select
a different directory, use the
↑ and ↓ keys on the keyboard. To add a new directory, use the + key on
the keyboard. To remove a directory, use the - key on the keyboard.
Remote file name
The Remote file name is the name you want the file that you are uploading to have on the host
computer.
Upload from
The Upload from list selects whether you upload the current part in memory or from a directory on the
local hard disk. If you select one of the local directories, the following fields are available: Files, Local
file name and Preview. To select a different directory, use the
↑ and ↓ keys on the keyboard. To add
a new directory, use the + key on the keyboard. To remove a directory, use the - key on the
keyboard.
Files
The Files list box contains a list of all the files that are in the Upload from directory that can be
uploaded to the host computer. To scroll through different files, use the
↑, ↓, PAGE UP and PAGE
DOWN keys on the keyboard. To remove a file, use the - key on the keyboard.