Hypertherm HTA Rev 6.00 Operators Manual - Manual (Page 168)

154 Operator’s Manual
Laser Cut Chart Screen.
The Cut Chart Database (cut process parameters) transmitted to configure the laser head are
based on the following process variables. All values are user definable.
Material Type
The Material Type, such as Mild Steel, Stainless Steel or Aluminum, may be selected.
Specific Material
This is a user defined value to allow the user to create a custom database based on unique
characteristics of the material type. Press the Plus key “+” to enter an new material name or “-“ to
delete.
Process Power
The appropriate process power (Wattage) for the material thickness and material type for the
desired process.
Assist Gases
The appropriate Assist Gases for the desired process.
Material Thickness
The material thickness for the selected material type.
Focal Length
Specific Focal Length lens that needs to be installed in the laser head for the desired process.