Hypertherm HTA Rev 6.00 Operators Manual - Manual (Page 20)

6 Operator’s Manual
Built-in Parametric Shape Library
Contains 66 commonly used shapes.
Simple Graphical prompts for entering all part dimensions.
Teach/Trace
Smart-arc and Smart-Line algorithms for optimum program size and contouring smoothness.
Converts your existing optical tracer templates to EIA RS-274D programs, and stored on the internal
hard disk drive.
Automatic part closure detection.
Allows multiple pierce points, lead-ins, lead-outs, and rapid traverse segments.
Upload taught part programs to CAD system, remote host computer, or other storage device.
Requires a separate optical tracer control system.
Performance Features
Digital servo positioning control for any cutting machine. An optional SERCOS Interface™ allows
expansion of motion axes and distributed I/O.
Control dynamic accuracy of 0.002 inch (0.051 mm) with 1000 edge/inch encoders.
Programmable cut speeds up to 3000 IPM (76,200 mmpm).
Variable segment length look ahead for optimum contouring performance.
Automatic corner slowdown and torch height disable for clean, sharp corners.
Speed Increase/Decrease buttons for optimizing machine cut speed.
Automatic Plate and Corner Alignment corrects for skewed plates.
Complete cut-loss recovery with backup and forward along path, off-path re-pierce and return-to-path,
and move pattern functions.
Rip Mode for straight-line cutting. Jog control cutting.
Punch, powder or Plasma marker capability.
Manual jog control with position read-out for positioning torches.
Manual Nester™ and optional HyperNest
® – CNC Automatic Nesting features for increased
productivity and increased plate utilization.
Automated Torch Spacing feature to position torch station spacing automatically through the part
program for standard and mirrored multi-torch cutting.
Rush Job Interrupt and Automated Power Loss Recovery features.