Appendix c: command – Hypertherm HTA Rev 6.00 Operators Manual User Manual
Page 203
Appendix C: Optional Command™ THC
189
Appendix C: Command
®
THC
The Command
®
THC from Hypertherm
®
is an automated Torch Height Control system which
adjusts the distance between the Plasma torch and the work surface for improved cut quality.
Once enabled in password protected setups, operational parameters for the Command
®
THC
may be configured at the Plasma Setups Screen for use. For additional information on the use of
the Command
®
THC, please refer to the operating instructions provided with the THC system.
The Purple arrow at the left edge of the softkeys indicates additional softkeys are available.
Pressing the shift key allows the test lifter function to be available.
Clear Error
The Clear Error softkey allows the user to clear an error at the Command
®
THC control box.
After the softkey has been pressed, a message will be posted on the control displaying a
description of the error.