Harken 7320.10 ESP Jib Reefing & Furling User Manual
Page 9
ESP Unit 0, 1
9
Preassembly
Toggle Deductions/Stay Into Foil Options
Options for Snaking Stay into Foils
WARNING! Using a threaded nosepiece with only adhesive at the upper rod eye terminal may result in
headstay system failure. Use Harken rod adapter stud. See www.harken.com/manuals for additional
safety information.
Unit
Leg Kit Toggle
Assembly
Clevis Pin
Ø
Pin-to-Pin (P-P)
Length
Type
Part No.
in
mm
in
mm
0
Short
7320.20 5/16
5
/
16
8
1
1
/
16
27
Long
7320.21 5/16
Short
7320.20 3/8
3
/
8
10
1
1
/
4
32
Long
7320.21 3/8
1
Short
7321.20 7/16
7
/
16
11
1
7
/
16
37
Medium 7321.22 7/16
Long
7321.21 7/16
Short
7321.20 1/2
1
/
2
13
1
5
/
8
42
Medium
7321.22 1/2
Long
7321.21 1/2
Medium or Long Leg Kit
with Toggle
Pin-to-Pin Length
Short Leg Kit
with Toggle
Pin-to-Pin Length
Turnbuckle
with Marine Eye
1. Swage Stud
2. Marine Eye
3. Wire for Mechanical Terminal
4. Harken Rod Adapter Nosepiece
Rigger supplied: Eye at lower end of stay or turnbuckle to mate with toggle. Use dimensions of Harken toggle
below to build stay to correct length.
Tip: Turnbuckles should be one-half to two-thirds open to allow shortening for new wire stretch and for fine-tuning
mast rake.