Harken 7320.10 ESP Jib Reefing & Furling - Manual (Page 2)

2 ESP Unit 0, 1
2
1
3 4
5
7
1. Leg Kit with Toggle
2. Leg Kit Collar
3. Drum Assembly
a. Neck
b. Guard Posts
c. Spool
4. Adjuster Tube Clamp Screws
5. Bow Shackle
6. Adjuster Tube Bushings
7. Adjuster Tube
8. Foil Screws
9. Connector Bushings 10. Feeder
11. Foil (2 m)
12. Connector
13. Connector Wedge
14. Top Foil
a. Trim Cap Holes
15. Halyard Swivel
16. Trim Cap Screws
17. Trim Cap
Parts Descriptions
Parts Description
8
9
11
10
12
3a
3b
9
8
3c
13
13
WARNING! Strictly follow all instructions to avoid potential
hazards that may kill or hurt you and others. See www.harken.com/
manuals for general warnings and instructions.
WARNING! This symbol alerts you to potential hazards that may kill or hurt you and others
if you don't follow instructions. The message will tell you how to reduce the
chance of injury.
Introduction
This manual gives technical information on installation and service. This information is destined exclusively
for specialized personnel or expert users. Installation, disassembling, and reassembling by personnel who are
not experts may cause serious damage to property or injury to users and those in the vicinity of the product.
If you do not understand an instruction contact Harken.
The user must have appropriate training in order to use this product.
Harken accepts no responsibility for damage or harm caused by not observing the safety requirements and
instructions in this manual. See limited warranty, general warnings, and instructions in www.harken.com/manuals.
Purpose
Harken
® Jib Reefing and Furling is designed for rolling sails on sailboats to reduce sail size or to completely roll
so wind has little effect on the sail. Use of this product for other than normal sailboat applications is not covered
by the limited warranty.
Safety Precautions
CAUTION! This symbol alerts you to potential hazards that may hurt you and others if
you do not follow instructions. The message will tell you how to reduce the
chance of injury.
6