Harken 7000 Carbo Racing Foil - Manual (Page 2)

2 Unit 0, 1, 2, 3 Carbo Racing Foil
Required
Phillips head screwdriver
Flat-bladed screwdriver
Hacksaw
Pliers
Tape measure
Drill with 5 mm (3/16") bit
or 6 mm (1/4") Unit 3 only.
Recommended
Heat gun for
cool weather.
Sail Specifications
Luff rope dimensions listed.
Actual luff tape dimensions
are larger.
Unit Luff Size
#0 #5– 4 mm (5/32")
#1 #6– 5 mm (3/16")
#2 #6– 5 mm (3/16")
#3 #6– 5 mm (3/16")
#7– 6 mm (7/32")
Pre-Assembly
Tools
Recommended height above deck:
Feeder: 110 cm (42")
Prefeeder: 76 cm (30")
Sail luff tape must
be 15-25 cm (6-10")
below feeder when
sail is raised.
15-25 cm
(6-10")
Description Unit 0 Unit 1 Unit 2 Unit 3
Extrusion H-37931B H-36315B H-37820B H-41360
Trim cap H-37932B H-34427B H-37833B H-41337
Feeder H-37934C H-34394C H-37838C H-41315
Sp
ac
er
tu
be Upper H-37935A H-34433A H-37879A H-41339
Lower H-37936A H-34432A H-37880A H-41338
Prefeeder 7006 7006 7006 7006
PVC tape HCP1748 HCP1748 HCP1748 HCP1748
Chafe guard 7000.30 7001.30 7002.30 —
Unit 0 Foil Length Max. Headstay
7000.9 m 29'6" (9 m) 32' 9" (10 m)
7000.12 m 39' 4" (12 m) 42' 8" (13 m)
7000.15 m 49' 2" (15 m) 52' 6"(16 m)
Unit 1 Foil Length Max. Headstay
7001.12 m 39'4" (12 m) 42' 8" (13 m)
7001.16 m 52' 6" (16 m) 55' 9" (17 m)
7001.20 m 65' 7" (20 m) 68' 11"(21 m)
Unit 2 Foil Length Max. Headstay
7002.16 m 52'6" (16 m) 56'6" (17.2 m)
7002.20 m 65'7" (20 m) 69'7" (21.1 m)
7002.24 m 78'9" (24 m) 82'9" (25.2 m)
Unit 3 Foil Length Max. Headstay
7003.24 m 78' 8-1/2" (24 m) 82' 8" (25.2 m)
7003.28 m 91' 10" (28 m) 95' 9" (29.2 m)
Max Unit 0 Unit 1 Unit 2 Unit 3
Wire 1/4" (6 mm) 5/16" (8 mm) 3/8" (10 mm) 7/16" (11 mm)
Rod -10 (6.35 mm) -17 (8.38 mm) -25 (10.31 mm) -30 (11.1 mm)
Size Check
Fasteners
Un
it 0
HFS1048 6-32x.375 Truss-head screw
HFS1049 6-32x.375 Barrel nuts
HFS699 6-32x.625 Flat-head screw
U
ni
t 1
HFS1048 6-32x.375 Truss-head screw
HFS1049 6-32x.375 Barrel nuts
HFS1047 6-32x.75 Flat-head screw
U
ni
t 2
HFS1094 6-32x.5 Truss-head screw
HFS1049 6-32x.375 Barrel nuts
HFS1093 6-32x.875 Flat-head screw
U
ni
t 3
HFS347 8-32x.5 Truss-head screw
HFS1139 8-32x.5 Barrel nuts
HFS1138 8x32x1 Flat-head screw
Par
ts
Rope
Tape