Guralp Systems CMG-5T Compact - Manual (Page 5)

Operator's Guide
2 Installation
2.1 Unpacking and packing
The CMG-5T Compact accelerometer is delivered in a single cardboard
box with foam rubber lining.
The packaging is specifically designed for the 5T Compact and should be
re-used whenever you need to transport the sensor. Please note any
damage to the packaging when you receive the equipment and unpack
on a clean surface. The package should contain:
•
the accelerometer,
•
a signal connection cable (if ordered),
•
a 26-pin connector (unless fitted to the supplied cable).
Place the accelerometer on a clean surface and identify:
•
the signal cable connector on the top of the unit,
•
the N/S orientation line, engraved on the lid,
•
the bubble level,
•
the screw-on cover for the output offset adjuster (see Section 2.4
on page 9),
•
the central hole for the main fixing bolt and
•
the serial number.
If you need to request the sensor production history, you will need to
quote either the serial number of the sensor or the works order number,
May 2011 5