Greenheck Melink IH3 Installation - Manual (Page 32)

Melink Corporation (513) 965-7300 www.melinkcorp.com
No Polarity
Detach the base from the cover and
secure it to the selected location on the
wall. Connect one end of the cable to the
terminal block on the base.
The Kitchen Temperature Sensor must be
located away from any hot or cold spots.
(such as above a kitchen appliance or
underneath a ceiling diffuser). Choose a
location that best represents the average
temperature of the kitchen.
A B
32
Install Kitchen Temperature Sensor
C
3
Select Suitable Location Attach Base to Wall
Connect Cable to Hood Controller
Connect the other end of the cable to terminals #23 and #24 inside the
Hood Controller. (There is no polarity for this connection.)