beautypg.com

Change log, Changes from 1.0.13.3 user manual, Changes from 1.0.12.4 user manual – Grandstream GXW400x User Manual User Manual

Page 7: Changes from 1.0.12.1 user manual, Changes from 1.0.11.3 user manual

background image

FIRMWARE VERSION 1.0.14.1 GXW400X USER MANUAL Page 5 of 60

CHANGE LOG

This section documents significant changes from previous versions of GXW400X user manuals. Only

major new features or major document updates are listed here. Minor updates for corrections or editing

are not documented here.

CHANGES FROM 1.0.13.3 USER MANUAL

Added feature [

Hold Target Before ReferHold Target Before ReferHold Target Before ReferHold Target

Before ReferHold Target Before ReferHold Target Before ReferHold Target Before ReferHold Target

Before ReferHold Target Before Refer

] in profile settings, which allows user

to hold or not hold the phone

call before refer.

Added feature [

Crypto Life Time

] in profile settings, which allows user to enable or disable Crypto life

time when using SRTP.

Added feature [

Play busy/reorder tone before Loop Current Disconnect

] in profile settings, which allows

user to configure if it will play busy/reorder tone before loop current disconnect upon call fail.

CHANGES FROM 1.0.12.4 USER MANUAL

Added option [

SIP Timer D

]

to configure RFC 3261 timer D in Advanced Settings.

Changed option name from [

Allow DHCP Option 66 to override server] to

[

Allow DHCP Option 66 or 160

to override server

]. Now option160 will be accepted by unit along with option 66 when enabled.

Added feature [

Download Device XML Configuration

] in advanced settings, which allows user to

download device configuration to local directory in xml format.

Added feature [

Upload firmware

] in advanced settings, which allows user to upload firmware file from

local directory.

Added feature [

Upload configuration

] in advanced settings, which allows user to upload configuration

file from local directory.

CHANGES FROM 1.0.12.1 USER MANUAL

Added the options to enable/disable [

Always send HTTP Basic Authentication Information

]

Added the options to restrict the m field sent in SDP [

Disable Multiple m line in SDPDisable Multiple m

line in SDP

]

CHANGES FROM 1.0.11.3 USER MANUAL