Connect your gxw400x gateway, Equipment packaging, Connect the gxw400x – Grandstream GXW400x User Manual User Manual

Page 11

FIRMWARE VERSION 1.0.14.1 GXW400X USER MANUAL Page 9 of 60

CONNECT YOUR GXW400X GATEWAY

Connecting the GXW400X gateway is easy. Before you begin, please verify the contents of the

GXW400X package.

EQUIPMENT PACKAGING

Unpack and check all accessories. Equipment includes:



one device unit



one RJ45 Ethernet cable



one 12V universal power adapter

CONNECT THE GXW400X

Follow these four (4) steps to connect your GXW400X gateway to the Internet and access

the unit’s

configuration pages.

1. Connect standard touch-tone analog phones to the FXS ports.

2. Insert an RJ45 Ethernet cable into the WAN port of GXW400X and connect the other end to an

uplink port (a router or a modem, etc.) Note: If the gateway is used in router mode, connect a PC

to the LAN port of GXW400X for initial configuration.

3. Plug the power adapter into the GXW400X gateway into a power outlet.

Follow the instructions from the

topic “

” for initial configuration.

The GUI pages will guide you through the remaining steps to set-up your gateway. Examples of the GUI

Interfaces can be downloaded from