Grandstream GXW400x User Manual - Manual (Page 13)

FIRMWARE VERSION 1.0.14.1 GXW400X USER MANUAL Page 11 of 60
FIGURE 2: DIAGRAM OF GXW4004-8 DISPLAY PANEL
TABLE 2: DEFINITIONS OF THE GXW DISPLAY PANEL
Power LED Indicates Power. Remains ON when Power is connected and turned ON.
Ready LED Remains ON after boot-up.
Console Turns ON when Console port is being used.
LAN LED Indicates LAN (or WAN) port activity
WAN LED Indicates PC (or LAN) port activity
LED 1 –8 Indicate status of the respective FXS Ports on the back panel
Busy - ON (Solid Green)
Available - OFF
Slow blinking FXS LEDs indicates Voice Mail for that port.
NOTE:
 All LED lights display green when ON.
 Slow blinking of READY, WAN and LAN LED together indicates a firmware upgrade or
provisioning state.
 LED POWER, READY and WAN lights are ON when device is up and running and successfully
registered to the SIP Server.
 Slow blinking of READY LED indicates that device has not registered with any SIP Service
provider.
FXS port
status
GXW4008
Display
LEDs