Grandstream GXW400x User Manual - Manual (Page 42)

FIRMWARE VERSION 1.0.14.1 GXW400X USER MANUAL Page 40 of 60
Primary RADIUS Server IP Address or FQDN of the primary RADIUS Server
Primary RADIUS Auth Port Primary Radius server authentication port. Default value is 1812
Primary RADIUS Acct Port Primary Radius server accounting port. Default value is 1813
Primary Radius Server
Secret
Special secret string should be preconfigured according to RADIUS Server
configuration
Secondary RADIUS Server IP Address or FQDN of the secondary RADIUS Server
Secondary RADIUS Auth
Port
Secondary Radius server authentication port. Default value is 1812
Secondary RADIUS Acct
Port
Secondary Radius server accounting port. Default value is 1813
Secondary Radius Server
Secret
Special secret string should be preconfigured according to RADIUS Server
configuration
RADIUS Timeout Default value is 2 seconds. The time between retries the GXW will send “Access-
Request” message to RADIUS server in purpose to authenticate it.
RADIUS Retry Default value is 3 times. Number of times the device will try to authenticate itself with
preconfigured RADIUS server during initialization process.
Download Device
Configuration
This setting allows user to download a text file containing all the P values of each
setting as configured on the unit. (Note: For Security Reasons, any Password will not
be Downloaded)
Download Device XML
Configuration
Allows user to download and save a XML file containing all the P values of each
setting as configured at that point on the unit. (Note: For Security Reasons, all
P asswords won’t be Downloaded)
Upload firmware Allows user to upload firmware file from local directory.
Upload configuration Allows user to upload configuration file from local directory.
TABLE 10: FXS PORTS SETTINGS
FXS Port FXS Port Number
SIP User ID User account information, provided by VoIP service provider (ITSP). Usually in the
form of digit similar to phone number or actually a phone number.