Grandstream GXW400x User Manual - Manual (Page 39)

FIRMWARE VERSION 1.0.14.1 GXW400X USER MANUAL Page 37 of 60
Automatic Upgrade Choose “Yes” to enable automatic upgrade and provisioning. When set to No,
GXW400X will only do upgrade once at boot up.
When “Check every day” or “Check every week” is checked, user can specify “Hour
of the day (0- 23)” or “Day of the week (0-6)”. Default time is Monday 1AM.
There are three options to choose from: “Always check for New Firmware at Boot
up ”, “Check New Firmware only when F/W pre/suffix changes”, and “Always Skip the
Firmware Check”.
Disable SIP NOTIFY
Authentication
Device will not challenge NOTIFY with 401 when set to Yes.
Authenticate Conf File If set to Yes, configuration file is authenticated before being accepted. This protects
the configuration from unauthorized modifications.
Firmware Key For firmware encryption. It should be 32-digit in Hexadecimal Representation. End
user should keep it blank.
SIP TLS Certificate The GXW400X series supports SIP over TLS. It has built-in private key and SSL
certificate. The user specified SSL certificate used for SIP over TLS is in X.509
format.
SIP TLS Private Key You may also customize the SSL Private Key. The user specified SSL private key
used for SIP over TLS is in X.509 format.
SIP TLS Private Key
Password
Enter SSL Private Key password here.
ACS URL User specify the Auto Configuration Server’s URL (TR-069 protocol)
ACS Username User specify the ACS Username
ACS Password User specify the ACS password
Periodic Inform Enable Default is No. If set to YES, device will send inform packets to the ACS
Periodic Inform Interval Frequency that the inform packets will be sent out to the ACS
Connection Request
Username
Set a user name for the ACS to connect to this device
Connection Request
Password
Set a password for the ACS to connect to this device
Connection Request Port Set a port number for the ACS to connect to this device, default is 7547
CPE SSL Certificate Configure the SSL authentication of Customer-premises equipment
CPE SSL Private Key Configure the SSL Private Key of Customer-premises equipment