Grandstream GXV3175 User Manual - Manual (Page 75)

FIRMWARE VERSION 1.0.3.76 GXV3175 USER MANUAL Page 75 of 139
Then press “Add Receiver” to add the number in the window as shown in Figure 48. Users should choose
the account from which the message will be sent out. After that, enter the phone number by tapping on the
blank area in “Phone Number” field then press the activated “Add” button. Or simply press “Find in
Contacts ” button to add the number from contact list.
Figure 49: Add receiver ’s number
After pressing “Find in Contacts” button, users will see the screen as Figure 50 shows. The primary
number for the contact will show in the list by default. If the users need to change to non-primary number,
press to add other numbers in the contact. Press to add the number as message receiver.
Figure 50: Add receiver ’s number from contact list
A yellow check will show on the left of the contact after pressing . Now tap on “Add” button and the