Grandstream GXV3175 User Manual - Manual (Page 63)

FIRMWARE VERSION 1.0.3.76 GXV3175 USER MANUAL Page 63 of 139
Call Log Options to log calls are Log All, Log Incoming/Outgoing Only(missed calls
will not be recorded), Disable All
Special Feature Different soft switch vendors have special requirements; therefore users
may need to select special features to meet these requirements. Users can
choose from Standard, CBCOM, RNK, China Mobile, ZTE IMS, Mobotix,
ZTE NGN and Huawei IMS depending on their need
Default setting is Standard.
Feature Key
Synchronization
Default is “No”. This option is to synchronize DND/Call Forward features
with Broadsoft . When set to “Yes”, a SUBSCRIBE will be sent out
periodically to the server. Then when DND/Call Forward features Call
Forward No Answer, Unconditional Call Forward and Call Forward on Busy)
are configured or changed on the phone and the Broadsoft server side,
those features will be synchronized on the phone side and the Broadsoft
server side.
Enable Call Features The default is set to Yes. If it is set to No, call features are disabled.
No Key Entry Timeout (s) Defines the time out duration on no key entry.
Default setting is 4 seconds.
Ring Timeout (s) Defines the time out duration on no answer.
Default setting is 60 second.
Transfer on Conference
Hangup
Defines whether or not the call is transferred to the other party if the initiator
of the conference hangs up.
Default setting is set to No.
Use # as Dial Key Selects whether or not # is used as Send.
Account ring tone This allows the user to configure the general ringtone used for this account.
Users can choose from different ringtones from the dropdown menu. They
can also upload mp3 files in Ringtone manager for their own ringtone.
Ring Tone Users can select up to 3 distinctive ringtones to match incoming caller ID.
Users can choose from different ringtones from the dropdown menu. They
can also upload mp3 files in Ringtone manager for their own ringtone.
Call Forward
Unconditional
Always forward all incoming calls to a number set here.
Call Forward Rule by
Time
Sets the call forward numbers based on a timer.
Call Forward Rule by
Work
Sets the call forward based on different conditions.
Call Forward Busy To Forward the call if line is in use.
Call Forward No Answer
To
Forward the call if do not answer after a number of rings.