Grandstream GXV3175 User Manual User Manual
Page 46
FIRMWARE VERSION 1.0.3.76 GXV3175 USER MANUAL Page 46 of 139
Subnet Mask
This field shows the subnet mask of the GXV-3175.
Default Gateway
This field shows the Gateway of the GXV-3175.
DNS Server
This field shows the DNS Server of the GXV-3175.
NAT Type
This field shows the type of NAT configured.
Status/System Info
Product Model
Defines the product model: GXV3175.
Hardware Revision
Hardware version number: Main Board, Interface Board.
Part Number
This field contains the product part number.
Program Version
• Program: This is the main firmware release number, which is always used
for identifying the software (or firmware) system of the phone.
System Up Time
This field shows system up time since the last reboot.
ADVANCED SETTINGS PAGE DEFINITIONS
Advanced Settings/General Settings
Local RTP Port
This parameter defines the local RTP-RTCP port pair used to listen and
transmit. It is the base RTP port for channel 0. When configured, for audio,
channel 0 will use this port _value for RTP and the port_value+1 for its
RTCP; channel 1 will use port_value+4 for RTP and port_value+5 for its
RTCP. For video, channel 0 will use port_value+2 for RTP and port_value+3
for its RTCP; channel 1 will use port_value+6 for RTP and port_value+7 for
RTCP. The default value is 5004.
Use Random Port
When set to Yes, this parameter will force random generation of both the
local SIP and RTP ports. This is usually necessary when multiple
GXV-3175s are behind the same full cone NAT. The Default setting is Yes.
(This parameter must be set to No before Direct IP Calling will work)
Keep-alive Intervals (s)
This parameter specifies how often the GXV3175sends a blank UDP packet
to the
SIP server in order to keep the “ping hole” on the NAT router to open.
The default setting is 20 seconds.
STUN Server
The IP address or Domain name of the STUN server. STUN resolution
results are displayed in the STATUS page of the Web UI. Only
non-symmetric NAT routers work with STUN.
Default STUN server: stun.ipvideotalk.com