Grandstream GXV3175 User Manual - Manual (Page 49)

FIRMWARE VERSION 1.0.3.76 GXV3175 USER MANUAL Page 49 of 139
c=2000/4000;
MAINTENANCE PAGE DEFINITIONS
Maintenance/Network Settings
Address Type This selects the type of IP address assigned: DHCP, PPPoE or Static IP.
PPPoE When PPPoE is selected, the user needs to enter the following: PPPoE
Account ID, PPPoE Password, PPPoE Service Name.
Static IP When Static IP is selected, the user needs to enter IP address, Subnet
Mask, Default Gateway, DNS Server 1 and DNS Server 2.
DHCP Host name (Option
12)
Default is blank. This option specifies the name of the client. This field is optional but
may be required by some Internet Service Providers.
DHCP vendor class ID
(Option 60)
Default is GXV. Used by clients and servers to exchange vendor-specific
information.
Alternate DNS Server This field sets the alternate DNS server for the user.
Layer 3 Qos This field defines the layer 3 QoS parameter. It is the value used for IP
Precedence, Diff-Serv or MPLS. The Default value is 0.
Layer 2 QoS
802.1Q/VLAN Tag
This field contains the value used for layer 2 VLAN tagging. The Default
value is 0.
Layer 2 QoS
802.1p Priority Value
This assigns the priority value of the Layer2 QoS packets. The Default value
is 0.
802.1x Mode This field sets 802.1x Mode. The default value is disabled. If EAD-MD5 is
selected, users will be required to enter Identity and MD5 Password.
User Agent Configurable User Agent string for downloading.
Proxy This field sets HTTP Proxy, HTTPS Proxy, FTP Proxy or No Proxy. Using
HTTP Proxy, other protocols can be applied by checking the box “Apply to
Other Protocol ”.
Maintenance/WIFI Settings
WIFI Functions This parameter enables/disables the WIFI function. The default setting is set
to “Disable”.
Wireless Mode This parameter defines the wireless mode used. The GXV3175 supports
802.11b/g/n